​​​​​​​ECG INGOT (CONDUCIVE) AND T-INGOT
Conductive Ingot / T-Ingot is produced in qualities of Etial-6E, Etial-7E and Etial-8E. Chemical compositions for these products and comparable standards are available in the following charts.
 
UNALLOYED INGOT AND T-INGOT
Production is performed in qualities of Etial-F, Etial-F1, Etial-0, Etial-1, Etial-3, Etial-5, Etial-6, Etial-7, Etial-8, Etial-9. Chemical compositions for these products and comparable standards are available in the following charts.
 
ALLOYED INGOT
Production is performed in qualities of Etial-110, 120, 140, 141, 145, 147, 150, 160, 171, 175, 177, 178, 180, 195, 220, 221 and 509 by means of induction furnaces.
Chemical compositions for these products and comparable standards are available in the following charts.
İLETKEN VE ALAŞIMSIZ KÜLÇE KİMYASAL BİLEŞİM LİMİTLERİ (% AĞIRLIK)
CONDUCTIVE INGOTS AND UNALLOYED INGOTS PRODUCT CHEMICAL ANALYSIS LIMITS (% WEIGHT)
  ​​​ETİ NORMAl1 ​Fe2 ​Si2 ​Cu2Zn2 ​Ti2 ​Mn2DİĞERLERİ /
OTHER COMP.
 ​
HERBİRİ             EACHTOPLAM TOTAL
ECG (İLETKEN ) CONDUCTIVE                 ETİAL-7E399,700,250,100,020,10
ETİAL-6E999,600,300,100,020,10
​​​​​​​ALAŞIMSIZ ​UNALLOYED                                                            ​ ​ ​ ​ ​ ​ ​ ​ETİAL-8/1799,900,070,030,030,030,020,020,020,10
ETİAL-8499,800,150,100,030,030,020,020,020,10
ETİAL-799,700,250,150,030,040,030,030,10
ETİAL-699,600,300,200,040,050,040,030,10
ETİAL-599,500,400,250,050,050,040,030,10
ETİAL-399,300,600,350,050,060,050,050,15
ETİAL-1899,000,800,350,050,100,050,050,050,15
ETİAL-099,000,700,250,150,060,050,050,15
ETİAL-F5,6,1095,005,001,001,501,500,051,000,101,00
​​​(1) Min. Değerlerdir. ( Min. Value )        ​ ​ ​ ​                                (6) Mn=1,00 max. ​ ​ ​ ​ ​
​(2) Limitler verilmemiş ise max. değerlerdir. ​ ​ ​ ​                   (7) Fe+Si=0,10 max. ​ ​ ​ ​ ​
(2) If limits are not gıven, it is max. ​ ​ ​ ​ ​ ​ ​ ​ ​  
(3) Ti+V+Mn+Cr=0,02 max.Fe/Si=2,00 min Fe+Si ≤ 0,30 ​ ​ ​ ​ (8) Fe+Si=0,95 max. ​ ​ ​ ​ ​
(4) Fe+Si= 0,20 max. ​ ​ ​ ​                                                                (9) Ti+V+Mn+Cr= 0,02 max.  Fe/Si=2,00 min  Fe+Si=0,31-0,35 ​ ​ ​ ​ ​
(5) Fe+Si=5,00 max. ​ ​ ​ ​                                                                 (10) Mg=1,00 max. ​ ​ ​ ​ ​
ECG (İL​ETKEN) VE ALAŞIMSIZ KÜLÇELERİN STANDARTLARI KARŞILAŞTIRMA TABLOLARI
CONDUCTIVE INGOTS AND UNALLOYED INGOTS EQUIVALENT INTERNATIONAL STANDARDS
STANDARDSETİNORMTSEGERMANY
DIN
USA
AA
FRANCE
NF
ENG.
BS
ITALY
UNI
ISOCSAA.S.T.M
ECG (İLETKEN)  CONDUCTIVE      ETİAL- 7EEAl99,07ECA6/L1E
ETİAL- 6EEAl99,6ECA6/L1E
​​​​​​ALAŞIMSIZ UNALLOYED ​ ​ ​ ​ ​ ​ ​ETİAL-8/1
ETİAL- 8Al99,8Al99,81080A 81 AP-ALP99,8AL99,8A
ETİAL- 7Al99,7Al99,71070A 7L 48P-ALP99,7AL99,7
ETİAL- 61060A 6Al99,69970ER1060
ETİAL- 5Al99,5Al99,51050A 51 B4507AL99,59950
ETİAL- 31030A 4AL99,3
ETİAL- 1Al99Al99,01200AL99,0
ETİAL- 0Al99CuAl99,01100A 451 CP-ALP99,0AL99,0Cu99001100
ALAŞIMLI KÜLÇELERİN KİMYASAL BİLEŞİM LİMİTLERİ (% AĞIRLIK)
ALLOYED ING​​OTS CHEMICAL ANALYSIS LIMITS (% WEIGHT)
ETİNORMFeSiCuMnMgZnNiTiPbSn
ETİAL-1100,704,00-6,002,00-4,000,20-0,600,150,200,300,200,100,05
ETİAL-1200,504,50-6,000,100,200,100,100,100,200,100,10
ETİAL-1400,6011,50-13,500,100,400,100,100,100,150,100,05
ETİAL-1411,0011,50-13,500,200,300,200,100,100,150,100,05
ETİAL-1450,6011,00-13,000,80-1,500,200,80-1,400,200,80-1,300,100,100,05
ETİAL-1470,258,70-9,103,40-3,700,200,40-0,800,200,200,100,100,05
ETİAL-1501,0011,00-13,001,75-2,500,500,400,700,300,150,100,10
ETİAL-1601,007,50-9,003,00-4,000,500,301,000,200,200,100,10
ETİAL-1710,509,00-10,000,100,40-0,600,30-0,450,100,100,150,050,05
ETİAL-1750,609,00-10,502,50-3,500,300,70-1,200,500,300,150,100,05
ETİAL-1770,206,60-7,400,020,030,30-0,450,040,020,08-0,140,050,05
ETİAL-1780,405,00-5,502,80-3,200,10-0,200,15-0,250,500,300,150,100,05
ETİAL-1801,009,00-11,500,70-2,500,500,302,000,500,200,100,20
ETİAL-1950,6017,00-19,000,80-1,500,200,80-1,300,200,80-1,300,100,100,05
ETİAL-2200,300,354,00-5,000,100,100,100,100,050,050,05
ETİAL-2210,300,304,00-5,000,100,050,100,100,15-0,300,050,05
ETİAL-5090,601,000,050,2-0,57-100,100,15
1) Limitler verilmemiş ise azami değerdir. (If limits are not given, it is max.) ​ ​ ​ ​ ​ 2) Mn+Fe=1,30 max ​ ​ ​ ​
​ALAŞIMLI KÜLÇELERİN STANDARTLARI KARŞILAMA TABLOLARI
ALLOYED INGOTS EQUIVALENT INTERNATIONAL STANDARDS
ETİNORMTSEGERMANY
DIN
USA
AA
FRANCE
NF
ENGLAND
BS
ISOCSAA.S.T.M
ETİAL-110AlSi5Cu3319A-S5U3LM4AlSi5Cu3SC53BC640
ETİAL-120AlSi 5AlSi5B443LM18AlSi 5S5S5A
ETİAL-140AlSi 12G-AlSi 12A413AS13LM6AlSi 12A13
ETİAL-141AlSi 12FeGD-AlSi 12413A-S 12LM 20AlSi 12FeS12PS12C
ETİAL-145A332A-S 12UNLM 13L2551SN122A
ETİAL-147
ETİAL-150
ETİAL-160AlSi 8Cu3FeG-AlSi 8Cu3A-380A-S 9U3ALM 24AlSi8Cu3FeL2630380
ETİAL-171AlSi10MgG-AlSi10MgA-360A-S9GU360
ETİAL-175Fe332LM 26 SC103A
ETİAL-177A357C135
ETİAL-178
ETİAL-180LM2A03831
ETİAL-195392,.1392
ETİAL-220AlCu4SiGAlCu4,5A-U50-TL91225
ETİAL-221AlCu4TiGAlCu4TiLM11AlCu4Ti226
ETİAL-509GDAlMg9
​ALAŞIM​LI KÜLÇELERİN TİPİK ÖZELLİKLERİ
ETİNORMETİAL-110ETİAL-120ETİAL​-140ETİAL-141ETİAL-145ETİAL-147ETİAL-150ETİAL-160
DENSITY (g/cm3)2,762,682,662,662,692,762,672,76
MELTING RANGE (0C)525-625575-630575-585575-585535-590520-580525-580540-595
THERMAL CONDUCTIVITY (cal/cm.s0C)0,320,350,370,290,210,250,23
CORROSION RESISTANCEMEDIUM​VERY GOOD​VERY GOODVERY GOODGOODMEDIUMMEDIUMMEDIUM
CASTABILITYVERY 
GOOD
PERFECTPERFECTPERFECTGOODGOODPERFECTGOOD
MACHINABILITIYGOODMEDIUMMEDIUMMEDIUMGOODGOODGOODGOOD
ANODIC OXIDATION​Only For Surface Protection. 
OTHER PROPERTIES AND APPLICATION FIELDSGood casting weldability characterictic cylinder heads, crank covers of the combustion motors.Kitchen tools, food containers, Marine fittings Various thin sectioned castings.Thin sectioned castings, motor boxes measuring boxes pump parts, marine environment.Thin walled pressure castings.Sand and Die castings, pistons and other motor parts.Die castings iron base.Used for high strenghthed pressure casting.Used for pressure casting which requires good surface.
NOTE: NUMERAL VALVES ARE APPROXIMATE VALVES.​ ​ ​
​ALAŞIM​LI KÜLÇELERİN TİPİK ÖZELLİKLERİ
ETİNORMETİAL-171ETİAL-175ETİAL-177ETİAL-180ETİAL-195ETİAL-220ETİAL-221ETİAL-509
DENSITY (g/cm3)2,642,762,682,742,772,6
MELTING RANGE (0C)575-595520-580570-525541-647520-620
THERMAL CONDUCTIVITY (cal/cm.s0C)0,270,250,380,240,350,24
CORROSION RESISTANCEVERY GOODMEDIUMGOODGOOD​GOODBADBADPERFECT
CASTABILITYPERFECTGOODGOODGOODGOODBADBADGOOD
MACHINABILITIYMEDIUMGOODMEDIUMGOODGOOD​VERY GOODVERY GOODVERY GOOD
ANODIC OXIDATIONOnly For Surface Protection. ​
OTHER PROPERTIES AND APPLICATION FIELDSStrength, castability, property,corrosion resistance, pressure tightness.Hot cracking resistance, very good fluidty and used for pistons of internal cambustion motors.Used for automotive industry pressure tightness, wheel manufacturing.Has an wide application field and it’s an general purpose alloy. It is used for pressure casting.Used at piston manufacturing cylinder blocks ofinternal combustion motors.Used at sand and granity die casting, gear boxes.Used at sand and gravity die casting general engineering application sand aero planes.Corrosion resistent casting kitchen and office applionces bodies, optical tools, decorative casting parts.​
NOTE: NUMERAL VALVES ARE APPROXIMATE VALVES.​ ​ ​ ​ ​ ​ ​ ​ ​